Menu

搜索更多信息
Dual-outlet Briquetting Press
Dual-outlet Briquetting Press

Double outlet metal chip briquetting machine is a hydraulic cold briquetting press with dual mould cavities and two discharge ports. It is designed for loose iron, aluminum, copper and stainless steel swarf from CNC and turning workshops.

Phone : +86 187 9029 6612
Mail : vip@wtgh.net
Product Introduction


Product Description

Double outlet metal chip briquetting machine is a hydraulic cold briquetting press with dual mould cavities and two discharge ports. It is designed for loose iron, aluminum, copper and stainless steel swarf from CNC and turning workshops. No binder is required. It compresses metal scraps into two high-density solid briquettes. Two outlets work alternately or synchronously to raise output greatly with similar footprint compared with single outlet models. It is widely used in medium & large machining plants, CNC workshops and metal recycling yards for continuous chip processing. It can connect with conveyors and shredders to form an automatic chip handling line. Cutting fluid is squeezed and collected during compression, reducing storage & transport volume and improving scrap value while keeping the workshop clean for environmental compliance.

 

Working Principle

Driven by the hydraulic system, the screw feeder delivers metal chips into two independent mould cavities. The PLC control system distributes hydraulic pressure for pre-compression and high-pressure holding. Cutting oil is squeezed out, and metal chips interlock to form dense briquettes. After holding pressure, the ejector pushes finished briquettes out from two outlets in alternating cycles to reduce idle time. Pressure, holding time and cycle speed are adjustable on touch screen. The two moulds can be identical or customized for different briquette sizes.

 

Advantages

  1. Dual-cavity dual-discharge design delivers much higher hourly capacity than single outlet briquetters with similar overall size, lower processing cost per ton for mass continuous production.
  2. Cold forming without changing metal property. Uniform high-density briquettes sink fast in furnace and reduce melting loss for better scrap price.
  3. Efficient cutting fluid separation. Recovered lubricant can be filtered and reused, cutting oil cost and meeting environmental requirements.
  4. Easy integration with screw feeders, belt conveyors and shredders for fully automatic lines, suitable for centralized chip removal in CNC workshops.
  5. Modular hydraulic and electric system. Two cavities can work independently. One cavity can keep running while the other is under maintenance to minimize downtime. Mould replacement is convenient.
Product Parameters


Model Briquette dimensions Briquette weight Output Motor power Weight
WL100 Ø80-100*(80-100)mm 0.8-3.4kg 4-5 units/minute 18.5kw 2850kg
WL150 Ø100-120*(80-100)mm 1.5-5.3kg 4-5 units/minute 22kw 4360kg
WL200 Ø110-130*(80-100)mm 2.1-7.2kg 4-5 units/minute 30kw 5860kg
WL250 Ø120-140*(80-100)mm 2.5-7.9kg 4-5 units/minute 37kw 6520kg
WL360 Ø130-150*(80-100)mm 2.8-9.2kg 4-5 units/minute 2*22kw 7530kg
WL500 Ø150-180*(80-100)mm 4.2-13.5kg 4-5 units/minute 2*37kw 11250kg
Applicable materials

FAQ


Q: What materials can the metal chip briquetting machine process?
A: It can press iron, steel, aluminum, copper chips and metal turnings from CNC machining, suitable for machine shops and recycling yards.


Q: What are the benefits after briquetting?
A: High-density briquettes save storage & transport space, reduce metal loss during smelting and collect cutting fluid.


Q: Vertical vs horizontal type, which one should I choose?
A: Vertical for small output & limited space; horizontal for large capacity and heavy briquettes.


Q: Do I need to dry metal chips before pressing? How about cutting oil?
A: Chips with a small amount of cutting fluid are acceptable. The machine is equipped with an oil collection tank.


Q: What is the hourly capacity?
A: Output varies by model, metal type and chip shape, ranging from 200kg/h to several tons per hour. We customize selection based on your raw material.


Q: Can I adjust the briquette size and density?
A: Briquette molds can be customized. Pressure is adjustable within the machine’s rated range.


Q: Can you change the voltage for our local power grid?
A: Custom motors and control cabinets are available for different voltage & frequency standards.

Online message
Leave your questions and we will contact you promptly.