Menu

搜索更多信息
Front-ejection baler
Front-ejection baler

Forward Push-out Metal Baler is heavy-duty horizontal three-direction hydraulic scrap metal baler. Compression force ranges from 160 ton to 400 ton.

Phone : +86 187 9029 6612
Mail : vip@wtgh.net
Product Introduction


Products Description

Forward Push-out Metal Baler is heavy-duty horizontal three-direction hydraulic scrap metal baler. Compression force ranges from 160 ton to 400 ton. It compresses light scrap steel, color steel sheet, aluminum scrap, copper scrap and shredded metal into dense rectangular bales. The finished bale is pushed straight forward out of the front gate by main ram, no flipping hinge. It is widely used in large scrap yards and matched after metal shredder for continuous production. Chamber lined with Hardox wear plate, PLC auto control, air cooling / water cooling optional.

 

Working Principle

Scrap metal is fed from top hopper. Top lid and side clamp cylinders gather loose material. Main ram compresses material to form dense bale. Front discharge gate opens, the main ram extends further and pushes the bale forward out of the chamber directly. Then ram retracts and gate closes for next cycle. Hydraulic overload protection equipped.

 

Advantages

✅ Heavy-duty push-out design, no flipping hinge, long service life

✅ Continuous extrusion, easy to connect with conveyor for automatic line

✅ High density bales with low springback, good value for steel mill

✅ Side & top pre-clamping, excellent for fluffy light scrap

✅ Replaceable wear liner inside chamber, easy maintenance

✅ PLC automatic cycle, remote control available

✅ Straight forward discharge, convenient for forklift handling

Product Parameters


Model Hopper Dimensions Bale Dimensions Bale Weight Output Bale Weight
WL40 500*250*200mm 250*200mm 8-10kg 20 packs/hour 3kw
WL80 700*350*250mm 350*250mm 15-25kg 20 packs/hour 5.5kw
WL80 700*350*250mm 350*250mm 15-25kg 15-20 packs/hour 5.5kw
WL80 800*400x400mm 400*200mm 20-30kg 15-20 packs/hour 5.5kw
WL100 1000*500*500mm 500*200mm 30-50kg 15-20 packs/hour 11kw
WL125 1000*600*500mm 600*200mm 35-65kg 12-15 packs/hour 15kw
WL135 1200*600*600mm 600*250mm 40-80kg 12-15 packs/hour 18.5kw
WL160 1400*600*600mm 600*300mm 70-100kg 12-15 packs/hour 22kw
WL200 1600*700*700mm 700*350mm 110-180kg 12-15 packs/hour 30kw
WL250 2000*800*800mm 800*400mm 160-250kg 12-15 packs/hour 2*22kw
Applicable materials

FAQ


What materials can your metal baler process?
A: It can handle light metal scraps such as scrap steel, iron sheet, aluminum shavings, copper, cans and car body scraps.


Q: What discharge types are available?
A: Mainly three types: side turn, forward push and side discharge. Choose according to your workshop and forklift operation.


Q: Can the bale size and pressure be customized?
A: Bale size is customizable; the pressing force can be selected according to your scrap density requirement.


Q: Can the machine match our local industrial voltage?
A: Standard 380V/50Hz. We can adjust motor and control system for your local voltage & frequency.


Q: What is the warranty? What are the wearing parts?
A: 1-year warranty for the whole machine. Wearing parts: blades, seals, oil pipes, hydraulic filter elements.


Q: What is the hourly output of the baler?
A: Output depends on scrap type and thickness, normally 5–15 tons per hour. We will recommend the right model for you.

Online message
Leave your questions and we will contact you promptly.