Menu

搜索更多信息
Turn-over (rollover) baler
Turn-over (rollover) baler

Side turn-out metal baler is a horizontal hydraulic scrap metal baling machine, widely used in metal recycling yards, smelters and scrap processing plants.

Phone : +86 187 9029 6612
Mail : vip@wtgh.net
Product Introduction


Products Description

Side turn-out metal baler is a horizontal hydraulic scrap metal baling machine, widely used in metal recycling yards, smelters and scrap processing plants. It compresses scrap steel, iron, copper, aluminum, stainless steel, metal shavings, paint buckets and light metal scraps into dense solid bales. The turn-out discharging design is its most prominent feature. It supports manual valve control or PLC automatic control. The chamber and bale size can be customized, and it can be matched with conveyors and magnetic feeders for full automatic recycling lines.

 

Working Principle

After scrap metal is fed into the compression chamber, the main hydraulic ram squeezes the materials step by step to form compact bales. Once compression finished, the locking door opens, then the turn-out cylinder drives the whole box to rotate 90 degrees and dump the bale out. After discharging, the box resets for the next feeding and baling cycle.

 

Advantages

  1. Neat, well-shaped bales with high density, not easy to break, ideal for furnace feeding.
  2. Fast and smooth bale discharge, less manual work, high productivity.
  3. Stable hydraulic system with overload protection for safe operation.
  4. Heavy-duty wear-resistant liner, good performance for light scrap, cans and mixed metal.
  5. Easy installation, no anchor bolts required optionally; diesel engine power is available.
  6. Flexible control options for small scrap yards and large continuous production lines.
  7. Reduce scrap volume greatly, save storage and transportation cost.
Product Parameters


Model Box Size Bag Size Bag Weight Output Power Weight
WL100 1000*600*600mm 250*250mm 20-50kg 20 packs/hour 15kw 5680kg
WL125 1200*700*600mm 300*300mm 40-80kg 15-20 packs/hour 18.5kw 7860kg
WL135 1400*900*800mm 400*400mm 60-120kg 15-20 packs/hour 22kw 9865kg
WL160 1600*1200*800mm 400*400mm 80-150kg 15-20 packs/hour 30kw 12350kg
WL200 2000*1400*900mm 450*450mm 150-250kg 15-20 packs/hour 37kw 21670kg
WL250 2200*1400*1000mm 500*500mm 200-300kg 15-20 packs/hour 2*30kw 26570kg
WL315 2500*1400*1200mm 600*600mm 250-400kg 15-20 packs/hour 2*37kw 32780kg
WL400 2500*1400*3000mm 700*700mm 300-500kg 15-20 packs/hour 2*45kw 43250kg

 

Applicable materials

FAQ


What materials can your metal baler process?
A: It can handle light metal scraps such as scrap steel, iron sheet, aluminum shavings, copper, cans and car body scraps.


Q: What discharge types are available?
A: Mainly three types: side turn, forward push and side discharge. Choose according to your workshop and forklift operation.


Q: Can the bale size and pressure be customized?
A: Bale size is customizable; the pressing force can be selected according to your scrap density requirement.


Q: Can the machine match our local industrial voltage?
A: Standard 380V/50Hz. We can adjust motor and control system for your local voltage & frequency.


Q: What is the warranty? What are the wearing parts?
A: 1-year warranty for the whole machine. Wearing parts: blades, seals, oil pipes, hydraulic filter elements.


Q: What is the hourly output of the baler?
A: Output depends on scrap type and thickness, normally 5–15 tons per hour. We will recommend the right model for you.

Online message
Leave your questions and we will contact you promptly.