Menu

搜索更多信息
Horizontal Briquetting Press
Horizontal Briquetting Press

Horizontal metal chips briquetting press is a special hydraulic briquette machine for iron chips, aluminum chips, copper chips, stainless steel swarf and alloy turnings from CNC machining.

Phone : +86 187 9029 6612
Mail : vip@wtgh.net
Product Introduction


Products Description

Horizontal metal chips briquetting press is a special hydraulic briquette machine for iron chips, aluminum chips, copper chips, stainless steel swarf and alloy turnings from CNC machining. Different from ordinary metal balers, it is designed for fine oily metal shavings. It compresses loose, tangled and oil-contaminated metal chips into high-density cylindrical briquettes without binder. Cutting fluid is squeezed out and collected during pressing. It is widely used in machining workshops, foundries and metal recycling plants. It can match chip conveyors for automatic waste recycling lines. Briquette diameter, pressing force and output are customizable.

 

Working Principle

Metal chips are fed horizontally into the compression cavity by screw feeder. The main hydraulic ram applies high horizontal pressure to compact the swarf. The cutting oil is separated and drained into the oil collection tank through filter slots. After pressure holding, the finished briquette is pushed out from the mould end. Then the ram retracts and starts the next feeding, pressing and discharging cycle.

 

Advantages

  1. Horizontal feeding design, smooth feeding, low jam risk, excellent for curly aluminum swarf and fine steel chips.
  2. High cutting fluid recovery rate up to 90%-95%. Recovered oil can be reused for machine tools.
  3. Dense solid briquettes, low melting loss and higher resale value for smelting.
  4. Reduce volume by up to 90%, save storage space and cut transport cost.
  5. Fully enclosed structure, prevent oil leakage and meet environmental requirements.
  6. PLC touch screen automatic control, stable 24h continuous operation with one operator.
  7. Hard alloy wear-resistant mould, long service life; custom voltage available for overseas market.
  8. Can connect with chip conveyors to realize automatic scrap collection.
Product Parameters


Model Cake dimensions Cake weight Output Motor power Weight
WL500 Ø160*(100-150)mm 8.5-13.2kg 1.5-2.3 T/H 2*30kw 15350kg
WL630 Ø200*(140-180)mm 17.5-22.6kg 3.1-4.5 T/H 3*37kw 23360kg
WL800 Ø240*(160-220)mm 28.9-39.7kg 5.2-7.3 T/H 3*45kw 31510kg
WL1000 Ø280*(180-160)mm 44.5-63.2kg 8.2-10.5 T/H 4*45kw 44560kg
WL1250 Ø300*(200-280)mm 56.6-79.1kg 10-15 T/H 5*45kw 48320kg
WL1500 Ø320*(220-300)mm 70.9-96.3kg 13-18 T/H 6*45kw 55870kg
Applicable materials

FAQ


Q: What materials can the metal chip briquetting machine process?
A: It can press iron, steel, aluminum, copper chips and metal turnings from CNC machining, suitable for machine shops and recycling yards.


Q: What are the benefits after briquetting?
A: High-density briquettes save storage & transport space, reduce metal loss during smelting and collect cutting fluid.


Q: Vertical vs horizontal type, which one should I choose?
A: Vertical for small output & limited space; horizontal for large capacity and heavy briquettes.


Q: Do I need to dry metal chips before pressing? How about cutting oil?
A: Chips with a small amount of cutting fluid are acceptable. The machine is equipped with an oil collection tank.


Q: What is the hourly capacity?
A: Output varies by model, metal type and chip shape, ranging from 200kg/h to several tons per hour. We customize selection based on your raw material.


Q: Can I adjust the briquette size and density?
A: Briquette molds can be customized. Pressure is adjustable within the machine’s rated range.


Q: Can you change the voltage for our local power grid?
A: Custom motors and control cabinets are available for different voltage & frequency standards.

Online message
Leave your questions and we will contact you promptly.