Menu

搜索更多信息
Vertical Briquetting Press
Vertical Briquetting Press

Vertical metal chips briquetting press is a four-column hydraulic cold briquetting machine. It is specially designed for iron, aluminum, copper, stainless steel and alloy turnings from CNC machining.

Phone : +86 187 9029 6612
Mail : vip@wtgh.net
Product Introduction


Products Description

Vertical metal chips briquetting press is a four-column hydraulic cold briquetting machine. It is specially designed for iron, aluminum, copper, stainless steel and alloy turnings from CNC machining. It compresses loose metal swarf into dense cylindrical briquettes without binder, and separates cutting fluid at the same time. It is widely used in small & medium machining workshops and foundries. Its compact footprint makes it perfect for factories with limited floor space. It can work with hoppers and conveyors for automatic feeding. Briquette size and pressing force are customizable, and different industrial voltages are available.

 

Working Principle

Metal chips are fed into the top hopper and fall into the mould cavity by gravity. The top hydraulic ram presses down vertically to compact the chips. Cutting oil is squeezed out and collected through the filter tank at the bottom. After pressure holding, the main ram lifts up, then the ejector ram pushes the finished briquette out. The ejector resets and the machine starts the next cycle.

 

Advantages

  1. Small floor space, vertical layout saves workshop area.
  2. Four-column guiding structure ensures even pressure and consistent briquette density.
  3. Gravity feeding, balanced seal stress, longer service life for oil seals.
  4. Efficient cutting fluid recovery, recycled oil can be reused for machine tools.
  5. Cold pressing, low melting loss during smelting, higher scrap value.
  6. Automatic PLC control, simple operation and easy maintenance.
  7. Low noise, enclosed structure, less oil splash and clean working environment.
  8. Multiple tonnage options, compatible with chip conveyors for automatic waste lines.
Product Parameters


Model Briquette dimensions Briquette weight Output Motor power Weight
WL150 Ø70*(40-70)mm 1-1.8kg 4-5 units/minute 15kw 4350kg
WL200 Ø80*(50-70)mm 1.2-2.8kg 4-5 units/minute 18.5kw 5360kg
WL250 Ø100*(50-80)mm 2.3-3.2kg 4-5 units/minute 22kw 6310kg
WL315 Ø120*(60-90)mm 4.2-5.5kg 4-5 units/minute 30kw 7560kg
WL360 Ø140*(70-100)mm 4.8-6.5kg 4-5 units/minute 30kw 8320kg
WL400 Ø140*(80-110)mm 6.2-8.1kg 4-5 units/minute 37kw 9870kg
WL500 Ø140*(80-120)mm 7.6-9.4kg 4-5 units/minute 45kw 11600kg
WL630 Ø160*(90-130)mm 8.5-10.5kg 4-5 units/minute 2*30kw 14800kg
WL800 Ø200*(100-150)mm 13.5-18.6kg 4-5 units/minute 2*45kw 23580kg
Applicable materials

FAQ


Q: What materials can the metal chip briquetting machine process?
A: It can press iron, steel, aluminum, copper chips and metal turnings from CNC machining, suitable for machine shops and recycling yards.


Q: What are the benefits after briquetting?
A: High-density briquettes save storage & transport space, reduce metal loss during smelting and collect cutting fluid.


Q: Vertical vs horizontal type, which one should I choose?
A: Vertical for small output & limited space; horizontal for large capacity and heavy briquettes.


Q: Do I need to dry metal chips before pressing? How about cutting oil?
A: Chips with a small amount of cutting fluid are acceptable. The machine is equipped with an oil collection tank.


Q: What is the hourly capacity?
A: Output varies by model, metal type and chip shape, ranging from 200kg/h to several tons per hour. We customize selection based on your raw material.


Q: Can I adjust the briquette size and density?
A: Briquette molds can be customized. Pressure is adjustable within the machine’s rated range.


Q: Can you change the voltage for our local power grid?
A: Custom motors and control cabinets are available for different voltage & frequency standards.

Online message
Leave your questions and we will contact you promptly.