Vertical waste paper baler is a vertical hydraulic recycling press, mainly for corrugated cardboard, OCC cartons, newspapers, office waste paper and paper trimmings.
Vertical waste paper baler is a vertical hydraulic recycling press, mainly for corrugated cardboard, OCC cartons, newspapers, office waste paper and paper trimmings. It can also handle plastic film, woven bags and other soft recyclables. The hydraulic ram compresses loose paper waste into neat dense bales, which are strapped with wire or plastic straps. It greatly reduces volume for stacking, forklift handling and container loading. It is widely used in supermarkets, e-commerce warehouses, printing houses, carton factories and small recycling yards, ideal for low-to-medium waste output and limited workshop space.
It consists of heavy steel frame, compression chamber, main hydraulic cylinder, power pack and safety control system. Operators load cardboard and waste paper into the chamber and close the safety door. The hydraulic ram drives the platen down for layered compression. Materials are loaded and pressed repeatedly until the bale reaches target density. The bale is manually strapped, then the platen retracts. The finished bale is ejected from the chamber. It works in semi-automatic mode with adjustable pressure and holding time, equipped with door interlock, emergency stop and overload relief protection.

Q: What types of materials can this vertical baler process?
A: It is suitable for materials such as straw, rice straw, plastic film, woven bags, cardboard boxes, plastic bottles, waste paper, hay, and rubber tires.
Q: What is the approximate weight of a bale produced by a vertical baler?
A: Depending on the material, it is generally 20–150 kg per bale; both the density and the dimensions of the bale can be adjusted according to your requirements.
Q: Will plastic film or woven bag bales easily loose?
A: The machine has compression locking structure, optional ejector. We suggest strapping tightly to avoid bale breaking.
Q: Does it support automatic strapping?
A: Standard version is manual strapping. Auto strapping system is available as an optional upgrade.
Q: Can you customize the voltage?
A: Standard is 380V 3-phase. 220V, 415V and other local voltages are available for customization.
Q: How should I choose between a vertical baler and a horizontal baler?
A: Vertical balers have a smaller footprint and require a lower initial investment, making them suitable for small to medium-scale output. Horizontal balers offer higher throughput and support continuous feeding, making them ideal for large-scale waste recycling operations and paper mills.