Hydraulic Gantry Shear is heavy-duty cold cutting equipment for scrap metal recycling. With heavy welded gantry frame and high-tonnage hydraulic cylinder, it cuts heavy thick scrap steel into standard furnace feed.
Hydraulic Gantry Shear is heavy-duty cold cutting equipment for scrap metal recycling. With heavy welded gantry frame and high-tonnage hydraulic cylinder, it cuts heavy thick scrap steel into standard furnace feed. Shearing force ranges from 400 ton to 2000 ton, fixed or trailer mobile type optional. It is widely used for thick steel plate, I-beam, H-beam, steel pipe, scrap car shell, ship scrap, bundled rebar and heavy structural steel. Usually matched with grapple and conveyor for continuous feeding. Alloy reversible blades, PLC automatic control, customized blade length and voltage.
Scrap metal is loaded into the long feeding box. Side compression cylinders compact bulky scrap, then push ram feeds material forward to cutting position. Main hydraulic cylinder drives upper blade down for vertical shearing against fixed bottom blade. Finished cut pieces drop out from discharge opening. Overload protection is built-in to protect machine under abnormal heavy load. Automatic circulation cycle.
✅ Super high shearing force for heavy & bulky scrap steel ✅ Fully automatic continuous cycle, high hourly output
✅ Clean cutting surface, no thermal deformation, higher scrap value
✅ Four-edge reversible alloy blades, low maintenance cost
✅ Stress-relieved heavy gantry frame, anti-impact & durable
✅ Manual / auto / remote control available
✅ Cold cutting, no open flame, low smoke, safer & eco-friendly
✅ Trailer mobile version optional for on-site demolition work
| model | Shear force(TON) | Pressing force(TON) | Knife length(MM) | Dehisce(MM) | Cuts per minute(T/S)) | Mainly cut material
size(MM) |
Total machine power(KW) | Operation method |
| QSZ43-63 | 63 | 16 | 600 | 280 | 9-16 | 30X30 Ø35 | 7.5 | Manual feeding or linkage |
| QSZ4-100 | 100 | 16 | 600 | 280 | 9-16 | 40X40 Ø45 | 11 | |
| QSZ43-120 | 120 | 20 | 600 | 280 | 9-16 | 45X45 Ø50 | 15 | |
| QSZ43-160 | 160 | 25 | 700 | 320 | 9-16 | 55X55 Ø63 | 18.5 | |
| QSZ43-200 | 200 | 25 | 800 | 380 | 9-16 | 65X65 Ø75 | 22 | |
| QSZ43-250 | 250 | 26 | 1000 | 480 | 9-16 | 70X70 Ø80 | 30 | |
| QSZ43-315 | 315 | 42 | 1200 | 520 | 8-16 | 80X80 Ø90 | 37 | |
| QSZ43-400 | 400 | 42 | 1500 | 700 | 8-16 | 90X90 Ø100 | 44 | |
| QSZ43-500 | 500 | 42 | 1800 | 900 | 8-16 | 100X100 Ø110 | 44 |

Q:What materials can your metal shear cut?
A:It is suitable for scrap steel, iron, copper, aluminum, steel plate, steel pipe and other light & thin metal scraps.
Q:What is the difference between crocodile shear, gantry shear and box shear?
A:Crocodile shear is small, low cost, easy to move. Gantry shear is for large thick metal blocks. Box shear has feeding box, safer for messy scraps.
Q:What voltage can the metal shear support?
A:Standard 380V 50Hz 3-phase. We can customize voltage & frequency for different countries, such as 415V, 440V, 60Hz.
Q:How about the hydraulic system and spare parts?
A:Adopts famous brand hydraulic pump and valve. We supply long-term spare parts with competitive price.
Q:Can you offer installation guidance and after-sales service overseas?
A:Yes. We provide English operation manual, video guide. Engineer overseas service is available on request.
Q:What is the production capacity of the metal shear?
A:Capacity depends on model and material thickness. We will recommend suitable model according to your raw material and hourly output requirement.